오랄-B 칫솔은 어디에서 제조되나요?

1. P&G-Confirmed Locations: Germany and China

Oral-B is a brand of Procter & Gamble (P&G). P&G’s public information identifies manufacturing at the sites below. For an individual product, check its packaging and contact brand support with the model and production code.

Marktheidenfeld, Bavaria: What P&G Confirms

P&G’s public site information identifies electric toothbrush manufacturing at 독일 마르크타이덴펠트 in Lower Franconia, Bavaria. For an individual model’s origin, check the packaging or contact brand support.

P&G confirms that the Marktheidenfeld plant makes Oral-B electric toothbrushes. To identify where a particular unit was made, check its model number and package origin label and contact brand support if you need help interpreting the production code.

2019 Expansion: Figures in P&G’s Announcement

A P&G press release dated June 27, 2019 described the start of an expansion project at Marktheidenfeld. It reported approximately 15,000 m²의 추가 부지 and a building footprint of 4,700 m². The announcement describes 8,700 m² of production floor space across two floors: injection molding on the ground floor, assembly and packaging upstairs. It also identifies 3,800 m² for adjacent offices, workshops, and technical areas.

P&G’s 2019 announcement describes planned production space for injection molding, assembly, and packaging. Treat the figures as a record of that project, rather than current output or capacity.

Shanghai Minhang: What P&G China Confirms

P&G China’s careers page identifies a factory in 중국 상하이 민항 as producing Oral-B electric toothbrushes. Its description also lists Braun electric shavers and some Gillette razors, along with a packaging innovation center.

• 오랄-B 전동 칫솔 Named in the factory’s published product range.
• Braun electric shavers and some Gillette razors are also listed.
• Packaging innovation The site description identifies a global packaging innovation center.
• Individual product origin

The factory profile describes the site’s products and activities. To confirm the origin of a particular toothbrush, use its package label and production code when contacting brand support. Ask brand support about the exact model and production code shown on the product or packaging.

2. How B2B Buyers Should Evaluate China-Based OEM Suppliers

A supplier’s country or city does not, by itself, prove product quality. A sound sourcing decision compares the exact product, process, site, and destination market. Start with evidence for the specific project — including the supplier’s documented capabilities, current production plan, and model-specific compliance documents. Avoid assuming every supplier in a region offers the same process, price, or quality system. The most useful basis is site-level capability that can be checked against the product specification and production location.

What to Verify

For each supplier, confirm the legal entity and production site, then match its processes and documents to the product and target market. Review the following project details:

• Product and motor specification Compare the claimed motor type and performance with the exact model’s specification and test records.
• Electronics and firmware Confirm the PCB, firmware version, and any wireless modules for the product you will order.
• Materials and brush heads Check the stated bristle, handle, and head materials against the product specification and supplier records.
• Molding and assembly Ask which processes are performed at the named site and which are outsourced.
• Battery and safety documents Match battery test reports to the cell and product configuration. Check whole-product requirements separately.

Do not infer a shared supplier relationship from a brand name, city, or component category. Verify any claimed customer or supply-chain relationship directly and obtain permission before publishing customer references.

Four Checks for Comparing OEM Suppliers

1. Comparable costs: Request itemized quotes for the same specification. Separate tooling, materials, testing, packaging, shipping, and other fees; compare like with like.
2. Applicable documents: Ask which rules apply in each destination market and request the model-specific declarations and test reports that cover the quoted configuration. Check regulatory requirements, declarations, test reports and quality-system certificates for their respective purposes.
3. Development scope: Confirm who is responsible for design, tooling, testing, packaging, and manuals; record outsourced work and change-control responsibilities.
4. Project schedule: Agree on a milestone plan after requirements are defined; samples, tooling, testing, and shipping can affect timing.

모터, PCB, 배터리 및 포장 부품을 포함한 상세한 단가 내역은 당사의 전동 칫솔 제조 비용 가이드.

3. How to Check a Product’s Origin

Start with the country-of-origin label on the product and packaging. Record the model number and production code, then contact the brand if the labeling does not answer your question. A charger’s identification number may differ from the toothbrush handle’s model number; give support the details for the component you are asking about.

For an OEM purchase, ask the supplier to identify the legal entity, production site and processes covered by its quotation. Record any outsourced work and the agreed responsibilities for inspection, product documents and changes.

For component-level pricing considerations, see our 전동 칫솔 제조 비용 가이드.

4. Comparing Independent OEM Suppliers

Compare suppliers on the same product specification and destination market. Include materials, brush motion, electronics, packaging, sample approval, testing, inspection and shipping terms in the brief. This makes differences in price and project scope easier to assess.

Ask each supplier where production will take place, which operations it performs and how it manages subcontractors. Judge its available capacity, documents and samples directly, rather than assigning a quality tier, MOQ or lead time to an entire province.

당사의 자사 브랜드 구강 관리 가이드 covers planning across toothbrushes, water flossers and related products.

5. B2B 조달 가이드: OEM 파트너 선정 시 고려해야 할 사항

When choosing an independent 전동 칫솔 OEM 제조업체, compare its capabilities with your project requirements. Our guide to 전동 칫솔 OEM/ODM 제조 공정 explains the development and production stages.

공장 평가 체크리스트

모든 공급업체에 물어봐야 할 질문들

1. Which documents apply to this model and market, and how can I verify their issuer and scope?
2. SKU당 최소 주문 수량(MOQ)은 얼마입니까?
3. Can you provide the applicable declarations, test reports and registration or listing details for this exact product?
4. 주문 확정부터 출하까지의 일반적인 생산 소요 기간은 얼마나 되나요?
5. OEM, ODM 또는 둘 다 제공하시나요? 그 과정은 어떻게 진행되나요?
6. 주문을 하기 전에 공장을 방문하거나(혹은 영상 투어를 요청할 수 있나요?)
7. 불량률은 어느 정도이며, 보증 정책은 어떻게 되나요?
8. 제가 목표로 하는 시장에서 해외 브랜드에 제품을 공급한 경험이 있으신가요?
9. 대량 생산에 들어가기 전에 시제품을 제공해 주실 수 있나요?
10. 견적 가격에 포함된 사항과 일반적으로 제외되는 비용은 무엇인가요?

자세히 읽어보세요: 전체 가이드 보기 중국에서 신뢰할 수 있는 전동칫솔 OEM 제조업체를 찾는 방법.

6. Working with Relish Tech

Relish Tech manufactures electric toothbrushes and water flossers. Discuss the following company and project details with the team:

Relish reports 20,000 m² combined manufacturing space across Shenzhen and Huizhou, 12 production lines and 30+ R&D personnel. To review examples of its work, see the 고객 사례 or read client reviews.

For an existing platform or a custom OEM 전동칫솔, share your intended market, product specification, quantity and launch plan so the team can define the development scope.

자주 묻는 질문