For an OEM water flosser project, approve each nozzle against the exact handle model and revision, then give the replacement pack its own part number. Your purchase specification should cover the connector, locking and sealing performance, approved tip types, pack identification, and future supply terms. This gives your team a clear basis for ordering the device and keeping compatible replacement tips available.
Before you approve the first order
- Build a handle-to-nozzle compatibility matrix with a test record for each approved pairing.
- Check the connector and water performance on production-intent samples.
- Match the retail box, refill pack, manual, and online listing to the same model names.
- Agree separate commercial terms for replacement tips, including pack quantities and design-change notices.
How water flosser nozzle compatibility works
A compatibility claim needs a named device family or model list. Similar-looking tips can have different connector dimensions, locking features, and seal arrangements. Ask the supplier to identify the exact handle revision used for its compatibility assessment.
Official accessory pages illustrate how specific the scope can be. Waterpik lists compatible countertop models for its JT-100E Precision tip and identifies several excluded product families. Philips lists its F1 Standard nozzle for Sonicare Cordless and Countertop Power Flossers, while excluding the Compact Flosser. Check the current model list when selecting an accessory. Waterpik JT-100E compatibility · Philips F1 compatibility
For a private-label range, give customer-facing model names a stable link to factory part numbers. A customer might know a device as “Travel,” while the factory identifies it by an internal platform code. Record both names so a refill order reaches the correct component.
If you are still selecting the main device, use the broader 口腔洗浄器OEM/ODM調達ガイド to define the platform and customization scope first.
What to put in the interface specification
Ask engineering to provide a controlled drawing of the nozzle-to-handle connection. The drawing should have a revision and agreed dimensions with tolerances. Attach the approved sample reference and the verification plan to the same specification.
The following checklist is a proposed purchasing framework. Agree the methods, limits, and sample quantities with the supplier for your selected platform.
On smaller screens, scroll within the table to read every column.
| 仕様項目 | Supplier deliverable | Buyer decision |
|---|---|---|
| Connector geometry | Stem dimensions, insertion depth, mating features, and drawing revision | Which handle models and revisions enter the validation plan? |
| Lock and release | Retention and release method, test procedure, and proposed acceptance limits | Can users install and remove the tip consistently? |
| Seal arrangement | Seal location, component ownership, material identification, and leak-test conditions | Which parts must stay matched when the nozzle is reordered? |
| Water delivery | Outlet configuration and operating results for the selected handle settings | Does the combined handle-and-tip setup meet the agreed specification? |
| Contact materials and finish | Material specification, relevant supporting documents, and surface-quality criteria | Are the supplied materials and finish approved for the intended product and market? |
| Part identification | Nozzle code, drawing revision, pack code, and lot-traceability method | Can purchasing and support identify the correct replacement after launch? |
Where several factories are involved, name the party responsible for the complete assembly. A nozzle supplier and a handle supplier should work to the same interface drawing and approval record. Your team needs one agreed record covering the assembled product.

Build a compatibility matrix
Use one row for each handle-and-nozzle combination. Record the tested revision, approval status, and evidence location. This makes a later model extension easier to evaluate and gives customer support a usable lookup table.
The example below uses fictional codes. Replace them with your own part numbers and actual test results.
On smaller screens, scroll within the table to read every column.
| Handle and revision | Nozzle and revision | Release status | Evidence required |
|---|---|---|---|
| Travel A, Rev 1 | Jet J1, Rev A | Awaiting verification | Fit, retention, release, leak, and operating test record |
| Travel A, Rev 2 | Jet J1, Rev A | Review after handle change | Engineering assessment and agreed repeat tests |
| Home B, Rev 1 | Jet J2, Rev A | Awaiting verification | Separate approval for the Home B interface |
Give the refill pack its own identity. A two-tip retail pack needs a pack code linked to the component code inside it. Keep the compatible handle names on the packaging and online listing synchronized with the approved matrix.
Approve samples before production
Use production-intent handles and tips for the final approval round. Record differences between these samples and the proposed production configuration before releasing the order.
Check installation and release
Inspect the connector, tip body, and finish. Fit the nozzle using the supplied instructions, confirm engagement, and operate the release mechanism. Ask the supplier to define repeat fitting and removal checks, including the cycle count and acceptance criteria for your project.
Check the assembled water path
Run the intended handle-and-tip combination under agreed operating conditions. Record the mode, power condition, water conditions, duration, and measurement method. Check for leakage at the connection and verify the agreed delivery performance. Compare different tip formats on the same documented basis.
Check the instructions with the product
Have a reviewer follow the draft installation, removal, cleaning, and replacement instructions using the sample. Confirm that the diagrams match the supplied connector and release button. Where the instructions specify a particular setting for a tip, include that setting in the review.
Release a versioned approval record
The buyer and supplier should identify the approved drawings, material specifications, sample references, packaging artwork, and test reports. Assign an owner to each open item. Close the items required for production release and record the final decision against the relevant versions.
について water flosser manufacturer checklist provides the wider supplier evaluation around this component approval process.
Choose the launch and replacement range
Start with the tip formats your chosen platform can support and your customers can identify easily. Ask for a quotation that separates the tips included with the device from standalone refill packs.
On smaller screens, scroll within the table to read every column.
| Range item | 承認する項目 | What to publish |
|---|---|---|
| 標準ジェットチップ | Exact connector, approved handle list, material, and pack count | Clear model compatibility and installation instructions |
| Bristled or specialist tip | Intended use, supporting evidence, operating instructions, and replacement guidance | Claims and instructions supported for that specific tip and device |
| Colour-coded tips | Colour references, user-identification method, and mixed-pack contents | How to distinguish each user’s tip |
| Standalone refill pack | Component revision, pack code, labelling, and replenishment terms | Pack quantity and compatible customer-facing model names |
Replacement instructions also depend on the tip. Waterpik recommends six-month replacement for its Precision tip and three months for its Orthodontic tip. Philips gives six-month guidance for its F1 Standard nozzle. Use the instructions validated for your own product when setting the refill message. Waterpik tip guidance · Philips F1 instructions
Relish’s water flosser nozzle range is a starting point for discussing available formats. Share the intended handle model when requesting a shortlist.
Plan replacement supply and model changes
Give refill packs a separate forecast and purchasing line. Ask the supplier to quote the refill MOQ, colour options, pack quantity, production lead time, and mixed-order terms. Confirm how long the approved component can be supplied and how a planned discontinuation will be communicated.
Keep commercial forecasts tied to units. A two-tip pack ordered in a quantity of 200 packs requires 400 tips. Add any service reserve separately so purchasing, packing, and warehouse teams use the same quantities.
Illustrative first refill order
A brand forecasts 200 two-tip refill packs and allocates another 50 individual tips to service stock. Its component requirement is 450 tips. These figures are a planning example. Set your own quantities using device sales, replacement instructions, customer purchasing behaviour, and the supplier’s confirmed order terms.
Agree how design changes reach the buyer
Ask the supplier to notify you before changing the connector, seal, nozzle material, outlet geometry, or other features covered by the approval. Review the effect on compatibility and decide which verification needs repeating before the changed part is supplied.
If a revised handle uses a different interface, give it a distinct revision or model identifier that support staff can recognize. Update the compatibility matrix, refill listing, packaging, and service instructions together. Retain the records needed to supply customers who own the earlier device.
At launch, make the refill easy to find through the device product page, manual, and support channel. Use the same model wording in each place so customers can match the accessory to their device.

A supplier brief you can reuse
Copy the fields below into your request for quotation. Complete the information you already know and ask the supplier to propose the remaining options.
Project and market
Brand, destination markets, sales channels, expected launch date, and forecast device quantity.
Handle reference
Factory model, customer-facing model name, revision, sample reference, and available interface drawing.
Nozzle range
Tip formats, colour choices, number supplied with each device, and proposed refill-pack contents.
Compatibility deliverables
Model matrix, controlled interface drawing, material specification, sample approval plan, and supporting records.
Commercial quotation
Separate device and refill prices, MOQ by item and colour, tooling scope, packaging cost, lead time, and delivery terms.
Supply continuity
Proposed spare-part supply period, change-notification process, discontinuation notice, and handling of earlier revisions.
Approval owners
Buyer and supplier contacts responsible for engineering, quality, artwork, and production release.
Frequently asked questions
Are water flosser replacement tips universal?
Choose a tip by its approved device compatibility list. Official Waterpik and Philips accessory pages identify supported models or product families. For a private-label product, request verification for the exact handle-and-nozzle combination before approving a compatibility statement.
Can two private-label models use the same nozzle?
They can share a nozzle when the proposed interfaces and operating combinations have been verified and approved. Put both handle models and their tested revisions in the compatibility matrix. Review subsequent changes through the agreed approval process.
What should I check on replacement-tip samples?
Check part identity, connector dimensions, installation, retention, release, leakage, water delivery, finish, and the supplied instructions. Agree test conditions and acceptance criteria for the selected platform, then retain the sample and verification references.
How often should customers replace the nozzle?
Follow the guidance validated for the specific product and tip type. Published manufacturer recommendations vary by tip. Include the applicable interval and any condition-based replacement instructions in the manual and refill listing.
Can I order branded refill packs separately from the device?
Include standalone refill packs in your supplier request. Confirm compatible models, component and pack codes, pack quantity, MOQ, artwork, price, and lead time. Agree these terms before advertising future accessory availability.
Plan a water flosser range with compatible refills
Relish works with oral care brands on OEM/ODM water flossers. Share your handle model or sample reference, target markets, planned tip range, and quantities so we can discuss the device and refill requirements together.
Our standard customization MOQ is 1,000 units, with flexibility according to the order. Confirm the quotation terms for each nozzle, colour, and refill-pack configuration with our team.
出典
- Waterpik Precision Tip JT-100E, model compatibility and replacement guidance.
- Philips Sonicare F1 Standard nozzle HX3042/00, supported product families and replacement instructions.
- Waterpik Water Flosser Tips Guide, tip-specific guidance.
Sources checked on 18 November 2026. The tables and supplier brief are purchasing tools to adapt to your own product specification.




